Monitoring hub

One hub. Four sensor ports. Your whole site.

The OCM hub collects readings from your sensors and sends them to your dashboard, so you can check the site from your phone. Start with a weather station and add the sensors your site needs.

Build a systemGet a quote

What the hub does

Everything on one dashboard

Four sensor ports

Connect up to four sensors to one hub through four-pin plugs.

Sends over cellular

Readings reach the OCM dashboard over the 4G mobile network.

Alerts you set

Get an alert when a reading crosses a limit you choose.

Grows with you

Add sensors later without starting over.

Pick a bundle

Start from a site like yours

Each bundle fills the four ports with sensors that answer a real decision. They are starting points. The Build a system page sizes yours.

Dryland paddock

  • Weather station
  • Multi-depth soil
  • Rain gauge
  • Spare port

Spray windows, frost, soil water and true rainfall.

Weather stations

Irrigated block

  • Weather station
  • Multi-depth soil
  • Second probe or soil EC
  • Spare port

When and how much to irrigate.

Soil moisture probes

Vineyard block

  • Weather station
  • Multi-depth soil
  • Leaf wetness
  • Leaf wetness or rain gauge

Frost, disease risk and irrigation timing.

Vineyards

Mine site boundary

  • Weather station
  • Dust (PM10)
  • Noise
  • Spare port

Blast windows, dust and noise reporting.

Mining

Construction site

  • Weather station
  • Dust
  • Noise
  • Spare port

Wind limits, dust and noise complaints.

Build a system

Grain store

  • Weather station
  • Bin temperature cable
  • Bin temperature cable
  • Bin temperature cable

Spoilage risk and aeration timing.

Build a system

Water point

  • Tank or dam level
  • Water EC
  • Water quality (pH or turbidity)

Supply and water quality at a glance.

Water management

Hub at a glance

The details

Sensor ports4 (four-pin plugs)
Connectivity4G cellular
PowerSolar with battery, or mains
Typical installationMost single-station installs finish in a day

Questions

Hub questions

Can I put more than one sensor on a port?

Yes. A splitter lets one port carry more than one sensor, and larger sites can have a custom expansion. Tell us what you need to connect and we will advise.

What if my site has no mobile signal?

The hub needs mobile coverage. Tell us where the site is and we'll check coverage before you buy.

Tell us about your site and we will recommend the sensors for your four ports.

Build a system